1505 - USB to fiber optic serial interface
- SKU:
- 1505
Description
Documents: FTDI VCP Driver / D2XX Driver
Description: USB to fiber optic serial interface using an FT232RL converter and Broadcom transceivers.
- USB powered with USB-B interface connector.
- Full duplex operation.
- 115200 baud rate at 100M using 1mm duplex plastic optical fiber.
- Longer runs possible at lower baud rates.
- Higher baud rates possible for shorter runs (Up to 500kbps).
- Fiber cables are polarized and snap securely in place with optional latches.
- Transmitter only powered when transmitting.
- All units tested at 460.8kbps with 20m loopback
Accessories:
- 1682 Logic level fiber optic interface
- Friction latched duplex fiber optic cable
- Latching duplex fiber optic cable
1 Review
-
Good Product
The product is good quality and works fine. The maximum baud-rate which I achieved was 230400 with 1m optical fiber using two of these devices. It's a very good product for that price! Even got an optical cable for free in addition to the two modules I bought.
Related Products
Related Products
1505C2 - Optical cable assembly with latching connectors
$4.00
Description: Duplex optical fiber terminated on both ends with latching connectors.
Price is per meter of cable length, 1M minimum length.
1505C1 - Optical cable assembly with snap-lock connectors
$4.00
Description: Duplex optical fiber terminated on both ends with snap lock connectors.
50mm USB powered fan
$5.00
USB powered fan to reduce heat sink temperature of the 1115 battery simulator module
USB powered:5V+/-10% and nominal 250mA
1M cable terminated with USB-A plug
Sits on top of 1115 battery simulator...
